Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Snowblower size help

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
srgallan


Joined: Feb 2, 2008
Points: 20

Snowblower size help
Original Message   Feb 2, 2008 8:37 am
To all,

I am a bit confused as to what size of snowblower I should be purchasing to meet my needs.  I'll start with a small description of requirements, I have a double lane driveway about 30+ feet in length, so I can have 4 full sized cars in the paved driveway.

I am located in eastern Canada but the snow over the last 7 years has been much less than I have been accustomed too, today on Feb 2nd we are getting thunder and lightning which I never remember getting in all my life this time of year.  When we get snow it's usually around 20 centimeters and often it's the good old heavy wet snow.  My driveway makes it's own little valley type so actual depth of snow is probably around two feet on a given dump of snow.

I am not too concerned if I clear the driveway in 10 minutes or 45 minutes, I just don't want to throw out my back shoveling anymore.  People tell me I should get a 10HP but others say an 8HP would be fine, I rather not spend the extra money if I don't need to and from what I can understand the power is all relative to the bucket size on the blower anyways.  I had my eye on a 26 inch/8HP tecumseh blower made by MTD for a reasonable price of 899 with 4 year limited warranty.  I checked out Ariens as I know that's the typically better brand but they were approximately 1,950 and I don't know if I can justify that expenditure.

Any thoughts if the 8HP dual stage would be enough or should I wait to find a 10 hp?

Thanks.
This message was modified Feb 2, 2008 by a moderator
Replies: 10 - 19 of 19Next page of topicsPreviousAllView as Outline
Moderator Denis


Location: CAN
Joined:
Points: 638

Re: Snowblower size help
Reply #10   Feb 5, 2008 10:28 pm
srgallan wrote:
To all,

I am a bit confused as to what size of snowblower I should be purchasing to meet my needs.  I'll start with a small description of requirements, I have a double lane driveway about 30+ feet in length, so I can have 4 full sized cars in the paved driveway.

I am located in eastern Canada but the snow over the last 7 years has been much less than I have been accustomed too, today on Feb 2nd we are getting thunder and lightning which I never remember getting in all my life this time of year.  When we get snow it's usually around 20 centimeters and often it's the good old heavy wet snow.  My driveway makes it's own little valley type so actual depth of snow is probably around two feet on a given dump of snow.

I am not too concerned if I clear the driveway in 10 minutes or 45 minutes, I just don't want to throw out my back shoveling anymore.  People tell me I should get a 10HP but others say an 8HP would be fine, I rather not spend the extra money if I don't need to and from what I can understand the power is all relative to the bucket size on the blower anyways.  I had my eye on a 26 inch/8HP tecumseh blower made by MTD for a reasonable price of 899 with 4 year limited warranty.  I checked out Ariens as I know that's the typically better brand but they were approximately 1,950 and I don't know if I can justify that expenditure.

Any thoughts if the 8HP dual stage would be enough or should I wait to find a 10 hp?

Thanks.


Hi and welcome to the forum, I suggest Troy-Bilt 9hp at Canadiantire my neighbour just got one, a real cadillac, here's the link

troy-bilt at canadiantire

Good Luck


borat


Joined: Nov 10, 2007
Points: 2692

Re: Snowblower size help
Reply #11   Feb 5, 2008 10:56 pm
Not absolutely sure but isn't Troybilt  an MTD product? 
Snowbound


Joined: Feb 17, 2006
Points: 76

Re: Snowblower size help
Reply #12   Feb 5, 2008 11:34 pm
Thought I'd mention what I paid for my Craftsman 11.5 hp (Briggs & Stratton) machine for what it's worth as information on this forum.  I bought it in February 2006 during a rare, snowless winter in southern New England.  It was a time when snowblowers were being heavily discounted at Home Depot, Loews and Sears.  Home Depot, I understand, was especially agggressive in their discount pricing during this end-of-season period.  I bought this machine for $909.00.  It was the last of its size on the sales floor.  List price was $1,300.00.
This message was modified Feb 5, 2008 by Snowbound
srgallan


Joined: Feb 2, 2008
Points: 20

Re: Snowblower size help
Reply #13   Feb 6, 2008 8:46 am
Well checked out Snapper and a 9.5 starts at 1900$ here, so that would be out of the question.  I thank you all for your time, this is a great forum.  Special thanks to Borat who has been trying to provide assistance and great info.  For the price I may even give the MTD 8HP pro a shot, I can buy two for the majority of these.
borat


Joined: Nov 10, 2007
Points: 2692

Re: Snowblower size help
Reply #14   Feb 6, 2008 9:14 am
You're welcome bud. 

The price quoted for the Snapper is m.s.r.p.  I was quoted the same when I was shopping for the Simplicity.  I ended up getting my 9528 for $1500.00.  Try throwing a low ball at the Snapper dealer.  You never know, he/she might just go for it.  However, if you're area is experiencing lots of snow, you might be out of luck if demand for snow throwers is high.  Good luck.

solara


Location: Boston
Joined: Jun 16, 2004
Points: 252

Re: Snowblower size help
Reply #15   Feb 6, 2008 1:54 pm
there can be some great used deals out there.,especially when the weather gets warmer.

2004-2005 Ariens 11528LE
Jacobsen snow-burst
srgallan


Joined: Feb 2, 2008
Points: 20

Re: Snowblower size help
Reply #16   Feb 6, 2008 3:55 pm
I have not ruled out that possibility but I find they tend to be expensive, but perhaps my idea of pricing for a used blower is incorrect.  For example, a 1988 8HP Ariens, was just re-done to be snow ready going for 500.  3 year old 8 hp Ariens going for 1000.  10 HP MTD's that are 8 years old going for 600.  I just figured for that kind of coin I may as well get new, although in the month of April/May they may be further discounted as you suggested.
Moderator Denis


Location: CAN
Joined:
Points: 638

Re: Snowblower size help
Reply #17   Feb 6, 2008 4:24 pm
borat wrote:
Not absolutely sure but isn't Troybilt  an MTD product? 
Yep Borat you are right, MTD bought a couple of company in the last 20 years, as far as I know, I owned an old VIking snowblower 1 stage with a 7hp tec and Eaton sold this line of MTD product.
This message was modified Feb 6, 2008 by Denis



mech12


Joined: Feb 20, 2006
Points: 273

Re: Snowblower size help
Reply #18   Feb 6, 2008 6:51 pm
  which direction does your driveway face???? which direction is the prevailing wind???  do you have fishing lakes nearby????     the best  snowblower to get is the one you can afford
wheelsca


Joined: Feb 2, 2008
Points: 2

Re: Snowblower size help
Reply #19   Feb 6, 2008 7:22 pm
Hay Denis I grew up in Montreal and we had a Viking single stage 5 horse blower from Eatons. It was a great machine.
I now have a Simplicity intermediate and I'm very happy with it.
Replies: 10 - 19 of 19Next page of topicsPreviousAllView as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.