Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > snapper sellsout to sears

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
mikiewest


Joined: Dec 29, 2007
Points: 262

snapper sellsout to sears
Original Message   Jan 16, 2008 8:05 pm
For now its only lawn equipment, that will be sold by sears made by Snapper starting this spring.How long before they start selling snowblowers??oh well in the end its all bout the almighty dollar.The worse thing that could of happened to snapper and simplicity was B&S buying them out...
Replies: 4 - 13 of 18Next page of topicsPreviousNextNext page of topicsAllView as Outline
Gelid


Location: Maine
Joined: Nov 19, 2007
Points: 84

Re: snapper sellsout to sears
Reply #4   Jan 18, 2008 11:50 pm
Snowbound wrote:

I remember when supermarkets were new to the world[...]


Holy schlitz! Just how old are you? 

;)

Honda HS928 TCD - If you lived where I live you'd have one too
oldcrow


If it ain't broke, try harder

Location: Northern MI
Joined: Jan 15, 2008
Points: 63

Re: snapper sellsout to sears
Reply #5   Jan 22, 2008 4:55 pm
My guess would be that he's not much older than 60 years. I'm younger that that, and can definitely remember what it was like to shop at a local grocery store. You could find supermarkets in the bigger cities at that time, but even then they were a bit of a novelty. It seems like they exploded overnight, and swallowed up the mom-and-pop grocers like Microsoft swallowed up the competition. Or Wal-Mart. Or Toyota. Or Anheiser-Busch, etc.

Point is, it really wasn't that long ago. If you're under 30 years old, I can see how this may seem like ancient history. Scary thing is, it will be less than 30 years before the next generation looks at your lifestyle and declares it "irrelevant". Just like the generation before. And, the one before that. And, the one before that...

How about gasoline at $1.00 per gallon? Do you remember that? That wasn't that long ago, either. I'll not even mention what the price of gas was when I started driving. No sense in bumming anybody out. Let's just say that, at 9 MPG, my Hemi 'Cuda got great gas mileage - on a minimum-wage job.

Sorry...
borat


Joined: Nov 10, 2007
Points: 2692

Re: snapper sellsout to sears
Reply #6   Jan 22, 2008 7:47 pm
Was that a 426 c.i. hemi?

I watched a documentary last night that pitted the Chevy 409, Pontiac 421, Chevy 427, Ford 427 and Mopar 426 against each other in a max. crankshaft dyno measured power comparison.  The 409 made 406 h.p., the 421 around 416 h.p., the Chev 427 at 425 h.p., the Ford 427 an impressive 637 h.p. and the Mopar - get ready for this, 853 h.p.!!!!!  That was in the 60s!  All of the above engines were stock components but blue printed.   The elephant was certainly an awesome engine.   I'm recalling from memory so I might be off by a horsepower or two.    

oldcrow


If it ain't broke, try harder

Location: Northern MI
Joined: Jan 15, 2008
Points: 63

Re: snapper sellsout to sears
Reply #7   Jan 23, 2008 1:37 am
Yup, the infamous 426. Mine managed a respectable 465 bhp, but it was pretty much factory stock. Still, the HP/Weight ratio made that 'little' car scream. Bendix four-speed, 4:15 rear end, and enough torque to pull stumps on Sunday. Not too shabby for 3500 bucks (used).

Not sure how they punched up a stock Hemi to over 850 HP, but I doubt if blueprinting would be enough. If I remember right, Richard Petty's 440 superbird (which dominated) ran well below 800 HP, but I could see how a blown funny car version (or top fuel) could pull those kind of ponies. Never heard about anything on the street that potent, though. You'd probably have to buy fuel at the airport to feed a beast like that.

Some of the well-healed Mopar guys in my town claimed 550+ horsepower with the right high-rise, camshaft, and carb combination. A lot of those hot parts were available from Chrysler dealers directly, as a result of their racing program. When I think of what 6 or 7 thousand would buy you back then, it makes me wish I had hung on to more than a few of those gas-guzzling monsters. Oh well, you know what they say about hindsight.

Oh yes, just to keep on topic - I agree with with the folks who figure there will be two seperate tiers of Snapper products. Sometimes, though, the low-end Sears version of branded power equipt. can be a real bargain. Other times, it's a matter of you get what you pay for. Will be interesting to see the first snowblowers appear at Sears (or K-Mart?).
borat


Joined: Nov 10, 2007
Points: 2692

Re: snapper sellsout to sears
Reply #8   Jan 23, 2008 10:56 am
The program measured h.p. at the crank and other than blue printing, nothing else was done to the engine.  They actually showed the dyno run for each machine.  It was truly an outstanding  engine.     You're probably talking rear wheel power.   I have also read that the stock 426 was actually rated closer to 550 h.p. bone stock to keep insurance rates down.     
Moderator Denis


Location: CAN
Joined:
Points: 638

Re: snapper sellsout to sears
Reply #9   Jan 23, 2008 11:07 am
borat wrote:
Now that's bad news. 

If Snapper/Simplicity goes "box store", we will probably see compromised quality of the Sears products similar to  Ariens and Toro at Home Depot.   That will be a shame.  Next step will be moving production to China. 

If you're planning on getting a Simplicity, get a good one while they still make them. 



You want to hear a good one boys? I went to a snowblower parts store around the corner, and this guy selling mower too, so I looked around to see what's new this year and I was supprised to see that orange mower call Ariens with you kknow what a KAWASAKI engine!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! the guy told me that kawa is coming strong so dont be surprised if tecumseh out of the way in the future.




oldcrow


If it ain't broke, try harder

Location: Northern MI
Joined: Jan 15, 2008
Points: 63

Re: snapper sellsout to sears
Reply #10   Jan 23, 2008 11:35 am
That is good news, indeed. I'm hoping that Toro will follow this lead with their future 4-stroke single-stage models. So far, the weakest link in this series seems to be the Snow-King engine. A real throwback, considering how far small 4-strokes have evolved. If Toro expects folks to shell out the big bucks for their name alone, they're in for a surprise.
oldcrow


If it ain't broke, try harder

Location: Northern MI
Joined: Jan 15, 2008
Points: 63

Re: snapper sellsout to sears
Reply #11   Jan 23, 2008 12:15 pm
borat wrote:
The program measured h.p. at the crank and other than blue printing, nothing else was done to the engine.  They actually showed the dyno run for each machine.  It was truly an outstanding  engine.     You're probably talking rear wheel power.   I have also read that the stock 426 was actually rated closer to 550 h.p. bone stock to keep insurance rates down.     
Yes, I was referring to brake horsepower, the standard of the day. Losses in the drive train gobble up significant horsepower. Also, the showroom offerings took a real HP hit due to the second generation of emissions standards (I had a 1971 model). The 550 HP figure sounds about right for 1969. though. The 426 was famous for it's bottom-end strength, as proven in top fuel racing. So, it's not that much of a stretch to imagine 850 HP. Still, that must have been one well-engineered package to produce 850 HP with normal aspiration (carbureted).

Surprised they didn't mention Ford's version of the Hemi - the 429 CI NASCAR engine. They were available in limited numbers on the street, and many were salvaged from former cop cars. This would seem to be the only engine of the day which could compete with the Mopar mill.

Also surprised to see such low numbers on the Chevy 427. Although they turned high revs (and burned out quickly), the truck version (with 4-bolt mains and forged rods) was  the motor of choice for many street racers. In a little 2100-Pound Camaro, it was a religious experience for sure (if you could keep the tires on the rims). If the factory induction was used, though, that would explain the low figures. GM was way behind the curve in this respect - even the Corvette suffered from severe breathing problems until fuel injection came along.

Would you happen to know what channel/network this program appeared on? Would like to give it a look-see for myself. There are a lot of things about the 60's and 70's that I'd just as soon forget. Cars aren't one of them, though.
borat


Joined: Nov 10, 2007
Points: 2692

Re: snapper sellsout to sears
Reply #12   Jan 23, 2008 12:20 pm
It was either on Speed or Discovery channel.
oldcrow


If it ain't broke, try harder

Location: Northern MI
Joined: Jan 15, 2008
Points: 63

Re: snapper sellsout to sears
Reply #13   Jan 23, 2008 1:09 pm
borat wrote:
It was either on Speed or Discovery channel.

Roger that. Will check the schedule online.
Replies: 4 - 13 of 18Next page of topicsPreviousNextNext page of topicsAllView as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42