Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

I'd like to buy a snowblower (for $1,500 or less if possible).  I have a normal sized driveway (10 feet by 80 feet) and get pretty heavy snow as I'm in the snowbelt here in northeast Ohio.  If you guys could help me witih the exact brand/model to get, it would help me out a lot.

1.  I read that the Briggs & Stratton engines are better than Tecumseh -- how true is this?

2.  Research has indicated the best brand names (in approximate order) are:  Honda, Simplicity (Snapper), Ariens, Toro -- is this fairly accurate?

3.  However, since my budget is $1,500 I'm looking for the best VALUE too (not necessarily the best blower).  I'm thinking the best value might be: Simplicity, Toro, Ariens, Honda -- is this accurate or am I way off?

4.  If I spend an extra $500 will I get something SUBSTANTIALLY better than what a $1,500 (or less)  snowthrower can give me? 

I'm not into bells and whistles (i.e. I don't want hand-warmers or electronic shute controls).  If you can offer any advice on the exact brand/model to get, I'd appreciate it!!

(P.S.  I also have a 600 squarefoot deck - is it OK to use a snowblower on a deck?)

jubol wrote:

Husky's web site doesn't even list your model and all of the blowers are Fixed Disc.

I don't get it.

Mine is 3 years old!!

All have disk drives, just that Huskies are infinite and others 2, 3 5, or 6 speeds.

                                 Fred

fireworks wrote:

It's like any other snow thrower in deep snow.  If the snow is heavy there will be resistance regardless of what machine you are using.  I used my Simplicity a couple of weeks ago after a big 20+ inch snow fall of heavy drift snow.  It just ate it up.  If I have trouble getting it to turn in very deep snow, I just use the machine to make a big enough hole to turn it around.  You'd be doing the same regardless of one or two wheel drive. 

borat wrote:

Do you think this http://www.prestonhardware.com/estore-product-details.asp?id=24682 is comparable to the Simplicity L9528E ?

fireworks wrote:

Without physically inspecting the machine, I'd say it's a respectable effort but I'd still swing toward the Simplicity. 

The Husqvarna has a number of features that the Simp doesn't but, I can live without them.  The Simplicity on the other hand has desirable features that I prefer.  For instance it has the ohv B&S engine.  It's one horse power short but being an ohv it will likely outperform the Tecumseh engine and will certainly be more pleasant to live with due to less vibration and quieter running.  Another couple things on the Simp that I like are the chute control rod and the huge cast iron auger drive gear case.  I cannot compare build quality between the two machines because I have not physically inspected the Husky.  I will however take  Fred's word that it's put together well.  Dollar for dollar, I'd still go with the Simplicity. 

 

borat wrote:

True about the OHV.  Is the cast iron gear case that big a deal? Aluminum can be strong if done right.   I see what you mean about the rods.  Less maintenance I take it?

BTW are all the Briggs engines on the Simp OHV?

Guys,

The most important  factors when buying a blower as I see it are:  Location and amount of snow received!

Where I live, an MTD 8 HP is almost overkill. Blower might get 1 hour of use per year on the average.

So MTD is great here, would last 40 to 50 years !!

If you get pounded with huge amounts and frequency of snows, then invest in a Very high HP quality blower!

What do you buy, I like Chevys, you like Fords, buy any of the better blowers for your area and dealer support and you will enjoy having  to blow snow!!

Every blower has different Pro's and Con's, However  I would stay away from MTD blowers in heavy snow areas!!

I bought my Husky for large snow dumps, about once every 5 years,  tight easy turn capability,  great  chute control,  Tec OHV Engine, weight, and very good construction,

My Husky weighs 266 Lbs, fueled ready to go!!

It was weighed on a commercial scale!!

                                                      Fred

                                            

Fred has pretty much summed it up. 

Match the quality of the machine to the demands of the work it will be required to do.

However, if you're spending X amount of money, get the most value you can get for it.

So is the Ariens differential concept unique to them?  I seems like a good idea.

Does the Simp or Husky have something similar, or are they posi traction (is this what it's called in snowblower land? :) )  and can be unlocked to turn?