Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Finally here's the video and the conclusion of Clarence Impeller Kit!
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions |
|
 
Location: CAN
Joined:
Points: 638
![]()
|
 |
Finally here's the video and the conclusion of Clarence Impeller Kit!
Original Message Dec 12, 2007 11:42 am |
|
THE MOVIE You may leave your comments and apreciation on youtube if you wish!
This message was modified Dec 12, 2007 by Denis
|
jubol
Location: Dover, De
Joined: Oct 3, 2003
Points: 1558
![]()
|
 |
Re: Finally here's the video and the conclusion of Clarence Impeller Kit!
Reply #3 Dec 12, 2007 12:16 pm |
|
Dennis, How much was your blowers performance improved in % ?? Would you buy the kit again if you had another blower? Fred
Husqvarna STE927(11.5HP) snowblower, MTD Pro Series 18/42 Lawnmower, MTD 6.5 HP Self Prop Lawn Mower, Weedeater 1500 Blower, Web Gensis 2000
|
Location: CAN
Joined:
Points: 638
![]()
|
|
|
Re: Finally here's the video and the conclusion of Clarence Impeller Kit!
Reply #4 Dec 12, 2007 2:09 pm |
|
Dennis, How much was your blowers performance improved in % ?? Would you buy the kit again if you had another blower? Fred
Well Fred, honestly yes i'd buy the kit again, it improved by 35% on fluffy snow and 55% on wet snow, so tha'ts very impressive for little rubber pale.
Congradulation to Clarence again.
|
jubol
Location: Dover, De
Joined: Oct 3, 2003
Points: 1558
![]()
|
|
|
Re: Finally here's the video and the conclusion of Clarence Impeller Kit!
Reply #7 Dec 12, 2007 3:26 pm |
|
Dennis, His kit also reduces clogs to almost never!! Maybe one in about 50 hours of usage!! Newfie, When your warranty runs out, install the kit ! ! ! ! ! ! ! ! Fred
Husqvarna STE927(11.5HP) snowblower, MTD Pro Series 18/42 Lawnmower, MTD 6.5 HP Self Prop Lawn Mower, Weedeater 1500 Blower, Web Gensis 2000
|
jubol
Location: Dover, De
Joined: Oct 3, 2003
Points: 1558
![]()
|
|
|
Re: Finally here's the video and the conclusion of Clarence Impeller Kit!
Reply #9 Dec 12, 2007 5:41 pm |
|
Loose tolerances. A gap of 3/8ths between impeller and impeller housing is cheaper to make than one with less than 1/64th!! Think of you blower as a water pump, how well does a "water pump" pump with a large gap between housing and impeller, worthless!! Fred
Husqvarna STE927(11.5HP) snowblower, MTD Pro Series 18/42 Lawnmower, MTD 6.5 HP Self Prop Lawn Mower, Weedeater 1500 Blower, Web Gensis 2000
|
Location: CAN
Joined:
Points: 638
![]()
|
|
|
Re: Finally here's the video and the conclusion of Clarence Impeller Kit!
Reply #11 Dec 12, 2007 9:19 pm |
|
that was great,i really liked the sound effects of the snow bouncing off your vehicle,was it easy to install?i want one. I think 2 hours is the average time for installing the kit. The hardest part is to tighten the bolts in the back of the impeller.
This message was modified Dec 12, 2007 by Denis
|
donjag
i've gone to find myself,if i'm here when you arrive,keep me here until i get back.
Location: menasha,wisconsin
Joined: Apr 25, 2007
Points: 142
![]()
|
|
|
Re: Finally here's the video and the conclusion of Clarence Impeller Kit!
Reply #12 Dec 12, 2007 9:21 pm |
|
|
|
|
