Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

THE MOVIE

You may leave your comments and apreciation on youtube if you wish!

Good going Denis.  You can really hear the engine bark when you get into the slush stuff.  Obviously nasty stuff to move.  The machine really blasts that stuff out.  Wouldn't want to be caught in front of it. 

By the way, thanks for the advice and posting my picture.  When I tried to add the attachment, I didn't have any choices.  I just displayed the image then copied the address for it from the top of the page.  I didn't see anywhere else that would give me an alternative.  Any suggestions?

Click on the yellow window thumbs up here that shows little mountain then paste your URL and your done

Hi Denis.

Thanks for the info but I had that part figured out.  My problem is trying to find the correct URL with the .jpg file over at www.serving.com.  When I select this picture, this is the only detectable URL  and it's right up at the top of the page in the address field:  http://www.servimg.com/image_preview.php?i=3&u=11783895

So, my problem is trying to get the correct address for the picture.  Any suggestions there?

Thanks for the help bud.  

check completly down the page of serving ypou'll find it Adresse de l'image

Thanks Denis.

I was overlooking one part of the process.  I had to hit "Links" to get me to the page with the addresses.  I'm posting a pic to see if it works.  I must admit that this is a $#%*bersome way of posting pics.  Other forums are much simpler. 

This picture was taken about ten days ago.  We got 25"  or so that weekend. 

:

.

donjag wrote:

Donjag, try to minimize your pic to small icon because every time you post we see the big blower.

Question

How the heck do you drill the holes in the impeller without disassembling it? I have a Sear 5hp (made by MTD). My impeller gap is nearly one full inch! I can't fit my hand or my drill down the chute. Even I remove the auger blades I won't be able to get the drill straigtht into the blade.

Thanks.

You need a long bit. 

How big are those holes about 1/4"? Just wanna see how much a long bit that's able to drill metal costs at the home centers.

To bad you never fixed the shoot rotator..............................;-}
Packo