Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Matching oil viscosity to air temp
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions |
|
ithaca_mike
Location: upstate NY
Joined: Nov 24, 2007
Points: 2
|
|
Matching oil viscosity to air temp
Original Message Nov 24, 2007 4:31 pm |
|
Hi folks, This forum is a great resource; thanks for all the useful information. My question concerns the type of oil I should use in my Toro 1028LXE snowblower. The manual says to use straight 30W when the air temp is 32 degrees F, 5W30 or 10W when the temp is 0 to 32 degrees F, and 0W30 synthetic when the temp is below 0 F. From past experience, I'll be using the snowblower in all three of those temp ranges. Changing the oil as the weather conditions change seems like overkill. Is it best to go up the middle and use 5W30 or 10W? Which type of oil offers the most protection over the widest range of temperatures? The snowblower is stored in an unheated barn. Thanks, Mike
Toro 1028LXE, Toro SR4, JD LX255, Makita RBC221
|
jubol
Location: Dover, De
Joined: Oct 3, 2003
Points: 1558
|
|
Re: Matching oil viscosity to air temp
Reply #4 Nov 27, 2007 8:38 am |
|
I keep it in for one season, one year! Change after snow blowing is over, then do it again after the next snow blow season is over. Fred
This message was modified Nov 27, 2007 by jubol
Husqvarna STE927(11.5HP) snowblower, MTD Pro Series 18/42 Lawnmower, MTD 6.5 HP Self Prop Lawn Mower, Weedeater 1500 Blower, Web Gensis 2000
|
|
|