Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Snowblower for a really steep driveway
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions |
|
automatic1stdown
Joined: Oct 30, 2007
Points: 8
|
|
Snowblower for a really steep driveway
Original Message Oct 30, 2007 2:40 pm |
|
I was hoping to get some advice on snowblowers for a really steep paved driveway. We just moved into a new home that has a 200' driveway that I anticipate will be a PITA to snowblow this winter. The steepest part is at the top 1/4 and I have to use a walkbehind mower on the lawn because my Husqavarna lawn tractor can't make it up the incline. Just walking up the driveway when completely dry is a chore. My first thought was to buy a track-drive snowblower, but these seem to be a rarity in today's market for some reason. It looks like Honda and Ariens make track-drive snowblowers, but they're really pricey (starts at $2k and up!). Is it safe to use a wheel-drive snowblower on my steep driveway? There are some wheel-drive models that have peaked my interest, but I'm worried the tires will slip. My biggest fear is the wheels will slip and the snowblower will slide backward into me! I suppose I could use tire chains, but won't that damage the pavement and negate any cost savings of a wheel-drive over a track-drive? Thanks in advance
|
nibbler
Joined: Mar 5, 2004
Points: 751
|
|
Re: Snowblower for a really steep driveway
Reply #4 Nov 1, 2007 8:42 am |
|
Four Wheel Snow Blower, something like this Sort of half way to a tracked unit. Something else that I just remembered. Two wheel units adjust the auger housing height by fiddling with skids on the side of the housing. This is due to the entire unit rotating forward and backward around the axle. Four wheel and tracked units typically have some sort of articulation to raise and lower the housing since the traction system is is more stable ( at least four points of contact). If you look at the picture you can see the front skids are higher than the road surface. I don't know how significant this is but I remember the Honda has a pretty sophisticated system to adjust the auger housing height. You can get crampons in stores that cater to "serious" hikers and climbers. Try doing some research on sites that cater to mountain climbers, they are used in ice climbing. Here is some info. As far as sanding is concerned if you have both sides of your traction system locked then it shouldn't be too hard to go up the slope with one side of the traction system on the sanded area and the other side going through fresh snow, you might not get a full swath but 2/3 to 3/4 is much better than 0. With enough money I'm sure you can get studded tires but chains would be a better option since they can be taken off and probably won't chew up the road surface as much. From the sounds of things its not snow that will give you grief but ice
|
automatic1stdown
Joined: Oct 30, 2007
Points: 8
|
|
Re: Snowblower for a really steep driveway
Reply #6 Nov 3, 2007 3:34 pm |
|
Thanks for the tips guys. I priced out a pair of crampons online. Yikes! Those things are expensive. Are they made by Honda? I visited 4 local dealers this morning and chatted with the salesmen. I have ruled out getting a Honda track-drive blower as the dealer (NorthernTool) did not impress me at all. Honda no longer allows them to carry the 2-Stage models and the salesperson sure wasn't trying to sell them. He said it would be a special order and I'd have to pay shipping. I said "No Thanks" and left. I went by 2 Ariens dealers and was impressed by both. I was surprised they both had a new track-drive model (9526DLET) on the showroom floor to play with. It looked pretty wicked, but both salesmen were not trying to sell it at all. They said turning it would be a big pain and I'd be better served with a wheel-drive model. One salesman actually demonstrated how difficult it is by lifting the backend up and pivot it on the front auger housing. I can just see myself throwing my back out in no time. I guess I'll be sticking with a wheel-drive model and have narrowed down my choices to the Ariens 1027LE, 1130DLE, and 9526DLE Pro. For whatever reason, they kept pushing the Deluxe models instead of the Pro and said the only advantage the Pro had was the cast-iron gear case. Based on all the awesome information you guys post on this forum, I know this is certainly not true. At any rate, I'm pretty set on getting a 9526DLE Pro for $1629 from the dealer as they seem comparable to a Honda quality wise.
|
jubol
Location: Dover, De
Joined: Oct 3, 2003
Points: 1558
|
|
Re: Snowblower for a really steep driveway
Reply #7 Nov 3, 2007 4:11 pm |
|
Auto Track drives are just as easy to turn as wheeled blowers,when running, when not ,put it on a $20.0 dolly! Get the track drive for your driveway. You will never regret it!!!! The friends of mine who have tracked blowers just love them!!! Very easy to use! Also Ariens dealers have no experience with the new Ariens Track Drive units, brand new this year!!!! So the Ariens salesman you talked to did not know what he was talking about ! ! ! ! ! ! Fred
This message was modified Nov 3, 2007 by jubol
Husqvarna STE927(11.5HP) snowblower, MTD Pro Series 18/42 Lawnmower, MTD 6.5 HP Self Prop Lawn Mower, Weedeater 1500 Blower, Web Gensis 2000
|
automatic1stdown
Joined: Oct 30, 2007
Points: 8
|
|
Re: Snowblower for a really steep driveway
Reply #10 Nov 6, 2007 10:16 am |
|
Just to provide some closure to this thread I wanted to post that I purchased a 2007 model 9526DLE Pro yesterday at an Ariens dealer. Here are the reasons why I choose the 9526DLE over the 9526DLET (Track version) - $500 premium to get basically the same machine spec-wise. The 9526DLET will undoubtably have more traction and be quieter (B&S Intek), but that's not worth it to me. That's a pretty steep price increase considering Honda charges only $100 to get a track-drive over a wheel-drive.
- Dealer has not sold any yet.
- Dealer has not serviced one before.
- Track-drive seems more complicated and prone to more problems over the long haul.
- Brand-new track design will probably take a few years to get the bugs worked out.
- Difficult to turn. There is no way my wife could operate a 9526DLET if I was out of town on business.
I am sure the 9526DLET is a fine machine, but it didn't seem like a good pick right now. Thanks again guys for the help.
|
|
|