Chainsaw Waundering Original Message Feb 19, 2007 8:33 pm
I've been doing a lot of cutting recently and my saw is starting to cut in an arc towards the left when looking at it from the operator position. I've been doing most of my own sharpening and according to the instruction this can be suaced by the cutters on one side of the chain being a different length from the others. The problem is they don't say which sid is at fault nor do they way wether the cutters are to long or to short. Does anyone know which I should be fixing?
The best instructions I've found so far are the ones that come with the Oregon sharpening guide. Does anyone no of any other good sources of info?
