Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Mid-80's Toro 724 Snowthrower slipping wheel clutch
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions |
|
rlwoodin
Joined: Feb 16, 2007
Points: 2
![]()
|
 |
Mid-80's Toro 724 Snowthrower slipping wheel clutch
Original Message Feb 16, 2007 2:07 pm |
|
The left wheel clutch on my Toro 724 is slipping badly. I would appreciate advice on how to approach repairing/adjusting it. It was working fine until recently. The clutch lever feels the same as before. I purchased this machine last year and have not had to work on it until now, and do not have any manuals. Thanks for any help!
|
rlwoodin
Joined: Feb 16, 2007
Points: 2
![]()
|
 |
Re: Mid-80's Toro 724 Snowthrower slipping wheel clutch
Reply #2 Feb 17, 2007 1:31 pm |
|
Where is the drive belt located? The right wheel works OK. I assumed that there is a common (powered) shaft that both wheels grab. Our weather has warmed up (32F!) so I am going out today and take a look at it.
|
SmMotorsRep
if it not broke your not trying hard enough
Location: canada,quebec
Joined: Mar 26, 2006
Points: 30
![]()
|
|
|
Re: Mid-80's Toro 724 Snowthrower slipping wheel clutch
Reply #3 Feb 19, 2007 1:02 am |
|
no belts..... Just take off your engagement thing on on each side of your handle bars and weld togeather your engage piston to your shaft . I alway hate them if that dont work check your spring its next to your tire , {check the other side to see what spring im talking about}if it missing that is the one you need to replace
too many to keep track of
|
|
|
