Placing a light on a Sears Two Stage Snowblower

Marc7703

Joined: Feb 10, 2007
Points: 1

Placing a light on a Sears Two Stage Snowblower
Original Message Feb 10, 2007 10:41 am

I would like to add a light ot my Sears snowblower, it is a two stage with the electric start that you use from an outlet, I was wondering if it can be done, how to do it, and what is the best light to use.

Thanks

bevans

tougher than the elements...everything in Wisconsin is

Location: Wisconsin ...close to Brillion
Joined: Dec 15, 2009
Points: 63

Re: Placing a light on a Sears Two Stage Snowblower
Reply #11 Feb 11, 2010 11:21 pm

Sounds like a math word problem....

Depending on where you live and if .....Jason walks up hill.......and (5A * 12V = 60W, so 5 to spare)....times the sq. rt of Pi.....you can put two, or 3, or 15 .......and mount it on the right hand side as high as you can .....my alternator is 18 watts, and when I measured gives out about 15 volts, AC, what would be the wattage bulb to use.......what is the temperature in PA and how much does a beer cost?

What the hell...its a friggin light.........spend the $3 bucks and go to sears and get it...........

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions