Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > craftsman snowblower light
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions |
|
tombraider
Joined: Jun 26, 2006
Points: 1
|
|
craftsman snowblower light
Original Message Jan 8, 2007 7:57 am |
|
I have a 1992 8/24 snowblower passed on to me this year.It works excellent;although we`ve only had minimal snow this year.Can anyone tell me how to hookup a light to this machine. I`ve been examining them on new one a stores, but i don`t know where the connections are made ,or if i need any special parts,or even it can be done.Any,all help is welcome thanx.Reid.
|
JasonnB
Location: PA
Joined: Dec 9, 2007
Points: 26
|
|
Re: craftsman snowblower light
Reply #26 Jan 4, 2011 9:35 pm |
|
I just picked it up. It's a Craftsman 536.887990, made 11/2002, with a Tecumseh engine. I just went out and started it up, and tested that yellow wire with bullet connector with my Volt meter, and put it to AC volts. It read about 5 volts, but it was idling. I then put it to full throttle and it jumped to about 15 volts, hehe. So, it looks like that's the wire to use :)
How do I find he specs on the Tecumseh alternator I have in my craftsman 536.887990, made 11/2002, with a Tecumseh engine??? I want to know how many amps it puts out, etc...
This message was modified Jan 4, 2011 by JasonnB
|
cutter7
Joined: Oct 27, 2010
Points: 2
|
|
Re: craftsman snowblower light
Reply #27 Jan 14, 2011 11:58 am |
|
Jason, I believe you need to locate the Tecumseh engine model to get the answer you need (not the snowblower model, since the Tecumseh engines are mounted on a variety of different makes of snowblowers). The engine model info is on a sticker or plate directly on the engine. Once you get that, you can search for any particular info you need. The following are some sites I found useful: http://www.outdoordistributors.com/Tecumseh/Tecumsehpartslists.html
http://www.cpdonline.com/692509.pdf http://www.tecumsehpower.com/CustomerService/BSI.pdf Hope that helps a bit.
|
|
|