Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Jari Jaw Snowblower
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions |
|
Kiddano
Joined: Oct 1, 2006
Points: 6
|
|
Jari Jaw Snowblower
Original Message Oct 1, 2006 6:13 am |
|
I have a Jari Jaw Snowblower and need to find info on it. I am restoring it and would like to get manuals and the like. There is a Ser# label on the back and it sayes Jari Corporation Serial # 770961 Model Landmaster. There is also a 77 stamped on the plate where the motor mounts in the front right corner. Any info would be a big help. I have used it the past 3yrs and let me tell you this is one hell of a machine. It ate my chain link fence, for real!!!! I am putting hand controls on it this year to help with that. There is nothing that this thing will slow down for. It had a Tecumseh 70H motor on it but that one has finaly seen it's last days so I am putting a new motor on it that I have ordered. I got it from my uncle who got it from a school that he worked at and he told me that it was a powerhouse and that the folks that made it knew what they where doin. I do not doubt that one bit after using it. This is a 7hp and I know for a fact that it will out perform any 10 or 12 hp that is stamped out today. They just don't make them like this one anymore.
|
richiewis
Joined: Jan 7, 2008
Points: 1
|
|
Re: Jari Jaw Snowblower
Reply #7 Jan 7, 2008 5:19 pm |
|
My father, his brother, and several of their friends started Jari Corporation. There were several manufacturing plants throughout Minnesota, the main manufacturing plant was located in Little Falls, Minnesota. I may have drawings and other literature to help restore your Jari Jaw II snow blower.
Please note, the Jari snow blower is also a 3 blade lawn mower in descise. The two stage snow blower is removed detaching two bolts and a drive belt. Then the mower is attached to the power unit is used to operate two attachments. What a great idea the Jari mower/snow blower was.
KJari
Ken,I have a Jari-Jaw and am also looking for a manual. Any ideas ?? Thnks for your time.
Richiewis
|
willlucey
Joined: Feb 1, 2008
Points: 1
|
|
Re: Jari Jaw Snowblower
Reply #8 Feb 1, 2008 8:26 am |
|
I have a complete, running Jari Jaw II snowblower which is on its way to the dump shortly, due to its cantankerous disposition. From reading the posts, it seems there are some folks that favor this model, and I am glad to offer it up to anyone who may have use for it or its parts. Pick up only, for free, in New Hampshire. I can break it up for parts, but must charge for my time and shipping. Contact me at wlucey@spearsystem.com if interested.
|
JCturboT
Joined: Jan 30, 2008
Points: 3
|
|
Re: Jari Jaw Snowblower
Reply #9 Feb 1, 2008 2:46 pm |
|
For those interested in a pic-
http://minneapolis.craigslist.org/for/549031645.html
Jeff
|
Matt22
Joined: Apr 21, 2008
Points: 1
|
|
Re: Jari Jaw Snowblower
Reply #10 Apr 21, 2008 8:25 pm |
|
Hi Ken,
I found your post. My father and a group purchased Jari from David Paulson one of the major share holders and my uncle Chuck ran the factory in Little Falls, MN. I was #8 from a family of 9 and boy did my older brothers have a great time testing out all of the cool new gear including gas powered skate boards. We have some great film at Ramset Jr High school parking lot, film in Fl testing out mowers and even a letter from the VP for the clean at Camp David. I even had the pleasure of using the double snow blower as I grew up and it is perfect fpr the deep MN snow falls.
Feel free to contact me if you would like to share some stories.
|
ictwarrior
Joined: Jun 22, 2008
Points: 1
|
|
Re: Jari Jaw Snowblower and Lawn Mower
Reply #11 Jun 22, 2008 6:15 pm |
|
Matt, My Grandfather purchased a Jari riding Lawn Mower in the 1950s or early 1960s used. My Father and Brother restored it with no manuals and have taken it to limited antique lawn mower showings. No one in Ohio or Indiana have ever seen or heard of this equipment. My Father is looking anyone that may have any additional information about this lawn mower. You and Ken are the first people that we have found mentioning Jari and Lawn mower in the same sentence. Your Help would greatly welcomed on our quest. Regards, Steve Vogel
|
erdrib
Joined: Jul 17, 2008
Points: 1
|
|
Re: Jari Jaw Snowblower
Reply #12 Jul 17, 2008 11:10 am |
|
I have recently come across a Jari that is in almost perfect condition and am wondering its value the mach number on it is 401328 it has a briggs motor on it model #81302 can anyone help Eric
|
jszalay
Joined: Oct 29, 2008
Points: 2
|
|
Re: Jari Jaw Snowblower
Reply #13 Oct 29, 2008 8:18 am |
|
I have recently aquired a model w-2 jari snow-thrower. The model is w-2 Mach.# 407 587 Pat.# 3,052,048 Briggs Mod.# 80302 There are photos at www.photobucket.com http://i366.photobucket.com/albums/oo109/juskim_photos/Jari%20Photos/IMG_1136.jpg http://s366.photobucket.com/albums/oo109/juskim_photos/Jari%20Photos/?action=view¤t=IMG_1126.jpg Everything on this machine works great. It is in great condition with all of the decals intact. The gentleman who had it hardly used it. I have had no luck trying to find any information on this machine. Anyone have any information? Thanks in advance. Justin
This message was modified Oct 29, 2008 by jszalay
|
mpenzoh
Joined: Dec 20, 2008
Points: 1
|
|
Re: Jari Jaw Snowblower
Reply #14 Dec 21, 2008 3:01 pm |
|
My father, his brother, and several of their friends started Jari Corporation. There were several manufacturing plants throughout Minnesota, the main manufacturing plant was located in Little Falls, Minnesota. I may have drawings and other literature to help restore your Jari Jaw II snow blower.
Please note, the Jari snow blower is also a 3 blade lawn mower in descise. The two stage snow blower is removed detaching two bolts and a drive belt. Then the mower is attached to the power unit is used to operate two attachments. What a great idea the Jari mower/snow blower was.
KJari
Hi KJari I just bought one in LI NY a working machine and I plan to restore it. Please let me know if you have any drawings or other literature Thanks Menachem
|
Berger
Joined: Sep 13, 2014
Points: 5
|
|
Re: Jari Jaw Snowblower
Reply #15 Sep 13, 2014 11:54 pm |
|
I am just new to this forum and just got my hands on an old Jari Jaws I that is in working order ec]except for the auger drive belts. I need to know the configuration of how these belts are installed and how they engage.
|
Berger
Joined: Sep 13, 2014
Points: 5
|
|
Re: Jari Jaw Snowblower
Reply #16 Sep 13, 2014 11:56 pm |
|
I am just new to this forum and just got my hands on an old Jari Jaws I that is in working order ec]except for the auger drive belts. I need to know the configuration of how these belts are installed and how they engage.
|
|
|