Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Toro 20023 Personal Pace Linkage Problem
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions |
|
ronnieray
Joined: Jan 9, 2005
Points: 17
![]()
|
 |
Toro 20023 Personal Pace Linkage Problem
Original Message May 22, 2006 4:43 pm |
|
Mowed lawn for a half hour today and suddenly the engine would get to full power and now only runs at about half usual RPM's. I have confirmed the problem is related to the linkage. But I can't find the problem. The bail for the throttle linkage seems to be work fine from the handle bar to the left side connection at the engine. But after that the linkage going accross the back of the engine on to the carbuator shows no movement at the carburator when the bail is engage.
I need your help. Has anyone else experienced this problem or worked on the Toro which had this problem? If so, what is the likely problem and what is the best way to fix it.
Thanks for the help.
|
ronnieray
Joined: Jan 9, 2005
Points: 17
![]()
|
 |
Re:buttlint, on closer inspection
Reply #6 May 23, 2006 9:33 am |
|
the problem seems to be with the linkage wire that is looped at the carbuator and goes to the back of the engine under the gas tank. This linkage wire is very limp and provides no resistence to the sping connected to the crontrol arm. Any ideas as to what maybe causing this? What does the repair involve should this need fixing? Thanks again |
ronnieray
Joined: Jan 9, 2005
Points: 17
![]()
|
|
|
At my age,"limp" is really a four-letter word
Reply #8 May 23, 2006 1:41 pm |
|
Thanks for the advice buttlint.
|
ronnieray
Joined: Jan 9, 2005
Points: 17
![]()
|
|
|
buttlint, my problem with my toro mower is fixed.
Reply #9 May 23, 2006 7:37 pm |
|
I sure appreciate your help. The problem and fix were just as you described. Thanks for everything. |
|
|
