Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Toro 826

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
oldandbent


Joined: Mar 7, 2006
Points: 1

Toro 826
Original Message   Mar 7, 2006 8:14 pm
I bought a used one 2 years ago but never used it. I tried to start it the other day and the electric starter went stone dead on the second try. It did start briefly. I have 120 v up to what appears to be a rectifier inside the switch housing according to the parts list--it's about an inch square and a half inch deep with two connectors in and two connectors out. Can anyone tell me what voltage I can expect on the load side of the rectifier (if that's what it is) or at the starter motor. If there is any advice, I'd sure be glad to get some.
This topic has no replies.
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.