Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Huskvarna 10530SBE
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions |
|
tgregoire
Joined: Dec 14, 2005
Points: 3
![]()
|
 |
Huskvarna 10530SBE
Original Message Dec 14, 2005 10:39 am |
|
Just purchased the 10530SBE and so far so good. The only problem I have is with the chute adjuster (left to right). The lever is EXTREMELY hard to move. I checked all the pivot bolts and there is enough free play to allow the chute to move freely. I suspect the cable is the issue. Has anyone run into this problem and if so what is the solution to the problem? Thanks |
jubol
Location: Dover, De
Joined: Oct 3, 2003
Points: 1558
![]()
|
 |
Re: Huskvarna 10530SBE
Reply #1 Dec 14, 2005 1:32 pm |
|
TGRE, You have to push it down to get it out of detent, then move it the way you want. Mine works very easy and smooth!!
Husqvarna STE927(11.5HP) snowblower, MTD Pro Series 18/42 Lawnmower, MTD 6.5 HP Self Prop Lawn Mower, Weedeater 1500 Blower, Web Gensis 2000
|
tgregoire
Joined: Dec 14, 2005
Points: 3
![]()
|
|
|
Re: Huskvarna 10530SBE
Reply #2 Dec 14, 2005 2:33 pm |
|
I am pushing it down and it is very hard to move. I suspect a cable problem.
|
jubol
Location: Dover, De
Joined: Oct 3, 2003
Points: 1558
![]()
|
|
|
Re: Huskvarna 10530SBE
Reply #3 Dec 14, 2005 2:48 pm |
|
TGRE, Lube the discharge chute where it it mounts to the augar housing. The area that it rotates on! Maybe that will help. I did mine and it is much smoother. Fred
Husqvarna STE927(11.5HP) snowblower, MTD Pro Series 18/42 Lawnmower, MTD 6.5 HP Self Prop Lawn Mower, Weedeater 1500 Blower, Web Gensis 2000
|
|
|
