Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

I know..I know...I already searched the board for this title but what I found didn't really answer the question.  But before I get to that, let me give a little back ground.  I just moved into a house in North Jersey with a pretty big driveway (more on that in a bit).  Living here all my life, its not that crazy but we do have some bad ones and from what I'm hearing, this one is going to be bad.  The previous owners contracted a guy who came for the first time a couple of days ago and did a really crappy job.  They just plow with a pickup so there is still less than an inch left on the driveway and where the tires rolled a nice coat of ice forms.  The bigger issue is that they plowed right into the backyard, meaning they tore up the grass where it meets the end of the driveway.  They charge 75 bucks and I guess its not bad but I really hate shotty workmanship.  I'm now sitting here waiting for them to come again to plow the 8 or so inches that is blowing around outside (its now 1:52 and still no show, luckily I work from home).  Ok to the details, the driveway is 800 ft. long (yes, 800 feet) and has a couple of curves.  There is an incline in it in the middle but I don't know what it is, maybe 15 degrees.  For the most part its about a car width except for the entry and the circle by the house.  It’s the house in the yellow box.

 

 

That being said, I’m contemplating on buying some machine to plow it myself for the reasons listed above.  After doing a bit of research I’m stuck with a couple of questions.  I see that a couple of manufactures have both Wheeled and Tracked machines.  I would think that the tracked model would be better in that it has a more traction.  I could see however how that might be a little harder to move while not running.  Before I forget, I two oversized car garages and a basement which is pretty big.  It’s a half flight to the basement and there are stairs from the garage to the basement inside so I could put some boards down and move it down there for the season.  I’m not to concerned about the agility of the machine because for my use (I would think) I’m basically running up and down the driveway and speed if more important.  I also see that the prices go up a bit as the width increases.  I’m inclined to spend a little extra as it may remove a whole pass for me.  So I’m looking for a machine that will not get stuck, will allow me to plow the entire driveway in a reasonable amount of time and most importantly, I want something that is solid and reliable.  I don’t want something that is going to break every season.  I’m a firm believer of “you get what you pay for” so I’m ok with spending a little bit more for a good machine.  I’m assuming that I would have to opt for the two-stage.

 

Thoughts….

Recommendations….

Complains (that I write too much)…

:)

 

-Jay

Thank you all for the very helpfull comments.

AZinOH, I have used a walk behind a couple times (a long time ago).  I'm 29 and in decent shape so I'm not so concerned about the "workout".  As someone else on the board has said, "It'll get me out and doing something".  Since I spend most (if not all) of my time in front a keyboard, anything would help.  No real budget or time contraints.  Like I said I'm willing to spend for a good product.  By time I'm thinking you mean how long its going to take.  I would like to make it quick as possible hence a large machine so I don't have to walk back and fourth too many times.  I have toyed with the tractor idea but I really don't have much of a yard and my push mover works fine for that so I haven't acted on that, yet.

BBGarage, I don't have a tractor but I guess riding on something is better than pushing behind it.

PCPC, thanks for the detail between the track and the wheeled, that is exactly what I was looking for!  If I go the walk behind, I'll definitly look into Simplicity.  I have also considered the jeep idea.  I do have the space (since I can leave it outside) so that maybe something to consider.  You mentioned that the plow on a tractor wouldn't be so good for the big snows (which I know) but does that still apply with a jeep with a plow?  Would the tractor (with a snow thower) be a better in deep snow than the jeep?

Garandman, as I stated I have toyed with this idea but since I don't have that much lawn, its held me back.  The only other possible issue is space.  I don't have a shed or anything but I guess I could build one.  Maybe I could move a couple of things to squeeze it into the garage.  I can clearly see the benifit of riding on something and making like 2 or 3 passes vs. walking and making alot more passes.  My only concern with the used route is not knowing what you get.  I haven't really worked on engines (tearing down carbs and stuff like that) so I'm concerned about things breaking.  I don't have a pick up or anything haul it back and fourth to the dealer for service so that concerns me too.

Again, thanks for all the great comments, its been a big help!

-Jay

Unless you REALLY need a tractor, going that route is fraught with (eventual) problems.  That, probably, is a path not recommended.  The suggestion that you DON"T need a tracked vehicle is probably correct.  You don't have the terrain that would dictate that.  Don't get swayed by the "bigger is better" philosophy - you have already said that a few extra steps doesn't concern you.   Get a machine with good horsepower - I have a 10.5 Tecumseh and would think that anything larger might be overkill.  Blower width (28' - 30") would be MORE than adequate.  Remember, many responding to your post want to service your problem with an expedience you might feel surpasses your needs.  Four passes on gear 3-4 is not that bad.  And you have a machine that is cost-responsible but one which will do the job.  And remember - you are not MARRIED to the machine.   If, after a year or two you find it does not feel right for your needs - SELL IT - there will always be buyers out there ready to pick up a good deal in the pre-owned market.  And you can move forward to another size/model/brand etc.

*(:>)*

If I was in your position and 29 again, liked excercise, (lol) I would also consider the Ariens 1336DLE with 12v battery start,  trigger lock differential, heated handles and is all metal.  It is 13 HP and cuts a 36 inch path. I would buy the optional weight kit and snow cab to break the wind and keep the snow out of your face. One pass down the driveway may be fine regarding the direction of the wind, but in the other 800 foot direction, you may get a ton of snow in the face and wish you were back in the house before the job was completed. This machine has a 3 year warranty.

I also have a house in North Jersey and one in NE PA. I have 2 Ariens machines, so I am a bit biased. One is a commercial and the other is a residential. I never had the slightest problem with either machine.

There is nothing wrong with Simplicity or Honda but you should check out all the best models. The 1336DLE Ariens is only available at
your local Outdoor Power Equipment shop. They will provide your service in case you need it so pick out  one that  gives reliable service.

Good luck!   

Just found out that the guy who comes to clean charges per inch or something like that.  I don't really get it since he just comes with a pickup and it doesn't matter how much snow but whatever.  150 bucks later (after the 12 inches we got) I'm really ready to pick out a blower.  I'm looking at the Ariens but am having a hard time going to 2900 for the DLE.  Seems like alot of money for 36 inch of clearing.  Are the DLEs that much better than the LEs, a 32 inch LE is 1900?  Thats a huge diff, its it worth it.  Also looking at the Simplicity 1390E (says its commercial grade) which is 2300 for  38 inches.  Seems like a better bet.  I've ruled out the hondas since it doesn't have these widths on wheels (just track models).

I know people say the big machines are over kill but I am just imaging myself, after that big storm, saying "damn, I wish I got the bigger one".  If it is too big, I can always get rid of it, I'm not married to it. :)

-Jay

Another really nice feature about the Simplicity, is the little trigger that you can pull, which unlocks one wheel, allowing you to very easily spin the machine around, and switch directions...

A couple things that bug me about Ariens, is for one, I'm not crazy about the idea of using a brass gear in the gear box. I've heard a lot of cases  where people (people I've known) blew the gear boxes on Ariens machines, though in most of the cases, it involved people replacing the shear pins, with bolts, but not all, though this was on their standard models. The commercial units do have heavier duty boxes, but I THINK that they still use a brass gear. Also, I believe I heard that Ariens beefed up the gear boxes on their lower end models, on their newest models, for this reason, though this was recent. Another thing that turns me off a little to Ariens is all the problems I read that people have, for instance last year, I kept reading about a problem they were having with their drive systems, and that Ariens had to redesign the drive, as the first design was failing, also a problem with their chutes... How long has this company been making snowblowers? They are not space shuttles... you wouldn't think they should be having problems like that... All in all, Ariens does make a very good machine, and they do stand behind them, but as you can tell, I've become a Simplicity fan.

The only thing I don't like about Simplicity's, is that their website sucks. Not exactly all that informative.

Sorry for the double posting. Don't know how I did that. I guess you can't go back and edit?

PCPC wrote:
Ariens has made over 2 million snow blowers, so yup, some of them have broken.

Most of the  new Ariens consumer models - "Deluxe" - have "the little trigger that you can pull, which unlocks one wheel, allowing you to very easily spin the machine around, and switch directions."
The Pro models have an automotive style differential, as do some older models.

You can do a search here for the "R3 upgrade" to read about the drive problem some Ariens machines had, a few years ago.

What kind of machine are you using now?


You can also get answers on this forum from an Ariens engineer who gives comprehensive answers to techical questions.

That easy turn feature must be very new. I don't believe that they had it, when I was looking. I wonder why they don't use it on the pro model... I would rather have that, then a diff....

I have a Honda 1132.. work, and a Simplicity 1060 for home. I agree with someone on another post, that the Honda handles, and chute adjuster, are too low. If I were to huy another machine, I would go with the Simplicity over the Honda, unless I really needed a track drive.