Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

   I just picked up a new Husqvarna 10527SBE, wanted to get the Ariens 926LE but everyone ran out of them. Looked at the Toro but was over my budget for the features I wanted. I liked my older Areins but it just didnt have the power for the heavier storms and the EOD. Also my drive is single wide 85'+ long, and due to an adjasent drive I have to double blow the snow for about 35 ft. I liked the power steer, and remote hood deflection feature on yhe Husky. Does anyone have this machine and if so has it lived up to your expectations? Im hoping for some snow in the next couple of days to try it out.

Just got done w/ 8-10" wet snow, it cut thru like butter. Still having problems getting used to the steering lock levers, I keep grabbing them for wheel and auger activation. Im used to my old Ariens which had bottom levers.

After my drive I then went and did 3 niegbors just for fun.

Going to change the oil this weekend after I let it warm up, to tired and cold to do it now. Also need top make a few cable adjustments, but I guess thats to be expected.

I checked out the Ariens 926DLE with the 9.5 OHV , real sweet w/ the differencial. A heavy duty machine. Just couldnt see spending the extra $500.

YK,

How far did it throw the wet snow???

If you Husky owners will email me, I'll give you the site for the repair manual that you can download for free!!

fonions@comcast.net    

                             Fred

35' + was windy so hard to tell.

http://www.usa.husqvarna.com/   for info and manuals.

YK,

I have the site for the REPAIR MANUAL!!

                                         Fred

I just purchased a 10530SBE and so far so good. The only problem is with the chute adjuster (left to right). The lever is EXTREMELY hard to move. I checked all the mechanical mounting points and they seem to be free. I suspect the cable is the issue. Has anyone experienced this problem and if so what is the solution to fix it?

TGRE,

You have to push it down out of the detent  and then it moves freely.

At least mine Does!!

Hi Jubol I have a poulanPro 11530SE  that looks just like the Husqvarna 1130SBE I could sure use a service manual for it.

Thanks

Ron

Hey everyone! New to the forum.

Just picked up a Husqvarna 10527SBE. Have only used it once but it worked quite well in semi-heavy (26-30 degree temps). The snow was probably around 12" deep and throwing it 20-25'. It handled the 18 inches (or so) of plowed snow at the street without problems also.

It was a somewhat spur of the moment purchase but the price was just too good to pass up. The local Ace Hardware had them marked down for the season. Their regular price was (I believe $1149.99) and it was on sale for $929.99. I actually went to Ace to get a snow shovel.....they were sold out so I got the Husky. It's alot more fun to use than a shovel too. Had I been shopping for a snow blower, I would have looked to Ariens. From what I've seen, my Husqvarna was made by the same company that makes (at least some of) the Ariens models. (AYP?) I doubt that I could have purchased the same Ariens for even close to the price I got this one for.

Snow is falling now with 4-8 inches expected by the time is stops tomorrow evening. I hope I don't have any problems but I'll put it to work again tomorrow and report its performance.

I'd also be interested in a repair manual also, if possible.

Thanks!!

P. Hicks

Blower worked well! We only had 4 or 5 inches total but there was a little drifting. The deepest drifts were only 8 or 10 inches, though. The temps were in the high 20's to low 30's so the snow was fairly heavy. The snow that was closest to the ground was really wet and heavy....almost slush. Went through all of it with no problems at all, as expected.

My only complaint about this machine is it's size for my use. My driveway is about 110' long and single wide for about half of its length. A smaller snowblower would have been better for maneuverability. I have to overblow about half of my drive and wanted a machine big enough to do that without any problems.  I guess a "too big" snow blower *can* be a problem but I'd rather have that as a problem rather than a machine that won't handle the snow.

tgregoire wrote:

Hi tgregoire,

Had the same problem last year on my 10-30. return it to dealer for carb ajust. and he reroute the cable ...much easier play on the lever. Also wath that there is no water in a cable that goes down and up. When it is very cold the water freese and the cable jam. Good luck .

Paid  $2000 canadian for that thing and i am deceive ,bucket is not aligning with the rest and it pull on the left.dealer says there is nothing he can do I am gone to sell it and by a blower that fit on my Polaris

Ciao