Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > you all are scaring me about snowblowers
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions |
|
snorunner
Joined: Nov 27, 2005
Points: 2
|
|
you all are scaring me about snowblowers
Original Message Nov 27, 2005 1:23 pm |
|
I will premise this with the statement that I have just found this site today, and did as much power reading as I could on snowblowers do for about an hour straight. I have needed, and known I needed a more powerful snowblower for years now. I currently have an inherited 1979 Toro, 2.5 hp (yes I said 2.5 hp) true paddle (not rubber auger) single stage 2 cycle. Unbelievably it has functioned as my main method of removing snow, albeit it usually took me about 2 hrs to snow blow my moderate to large paved drive way. (I live north of Detroit, where we've been hammered by heavy snowfall the past few years.) Anyway, anticipating heavy snow again this year, I went out and placed on order a Ariens 7524 from home depot yesterday. I made the choice primarly on the information I found on other websites as well as the Ariens website. I now wonder after reading the other posts here, if I made the right choice. It would seem If I could clear the drive way with my little 2.5 hp, anything bigger and more advanced would be better, even if it's not one of the leviathan I've read about in some of these other posts, i.e 9.25 to 11 hp. I'd consider the 926DLE but its 2X the cost. I guess my question is: Does anyone own this model or something comprable ever have any "real" trouble removing snow with theirs? I've gotta believe this 2 stage 7.5 hp would make a world of difference over what I've got. I do get this EOD build-up as I'm off a main road, but even my lil' Toro could manage through 18" of that...it would just take 45 minutes. I just don't want to spend all this money and wish I would have purchased something bigger, although I can't see that happening. Any advice would be appreicated while I can still change my order.
|
AZinOH
Those who accept self-deception will perish by it. Shakespeare said "to thine own self be true".
Joined: Nov 25, 2004
Points: 189
|
|
Re: you all are scaring me about snowblowers
Reply #2 Nov 27, 2005 2:10 pm |
|
My 7hp Toro has handled everything well for the past two years (I'm about 80 miles SW of Detroit), so I'd say your choice of the Ariens is a very good one. AZ
Snowblower...Toro Power Max 726te 2004 Lawn tractor...AYP w/ 14.5 Briggs-42in 2000
|
Jonathan
I am a marvelous housekeeper. Every time I leave a man I keep his house. -Zsa Zsa
Location: Near Albany NY
Joined: Sep 12, 2004
Points: 320
|
|
Re: you all are scaring me about snowblowers
Reply #5 Nov 27, 2005 8:11 pm |
|
I think your order for the Ariens is a good move. As Home Depot doesn't do the initial run-in on the machines, you will want to do it yourself. Sometimes they may not make some of the initial adjustments properly, so I'd suggest you check them as well. Last winter I was a greenhorn when it comes to snowblowers and found that there are alot of people on this site who can provide adcvice as you go along.
2004 Ariens 11528LE, Troybilt Horse "Big Red" Tiller (original), Troybilt Tuffy Tiller (original), Sears LT1000 mower, Lawn Boy 7073 21" mower, Stihl FS55 RC trimmer, Poulan Countervibe 3400 chainsaw
|
Walt
Do what you can, with what you have, where you are. -T. Roosevelt
Location: Chester County, PA
Joined: Dec 31, 2004
Points: 148
|
|
Re: you all are scaring me about snowblowers
Reply #7 Dec 3, 2005 6:57 am |
|
As with Lint, I keep up with the snow, so I am usually doing 4-6 inches because I like snow, and being in it. My 3650 handles that very well (aka- no trouble at all). I do 12" EOD pretty well too. Standard 12" depth isn't any problem, and an incline of 1-3/4" per foot isn't any trouble. My driveway is 2200 square feet. The portability of the machine is great. Lower maintenance is also good. My trimmer uses 50:1 oil, as does my 3650, so "mixing" isn't a problem, I always have it on hand anyway. (The labor involved with mixing 1 gallon of gas is far less than replacing augers and gear housings) My .02
|
|
|