Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

i am new to the world of snowblowers.

we live in Oakville Ontario which receives a far amount of snow each year.  average fall will be a few inches but the odd time we get the big snow fall and considerable drifting.  we have a double driveway about 40 ft long and 50 ft sidewalk.  i am looking for a machine that will handle the majority of the snowfalls we receive and would like to keep the size of machine to a minimum primarily due to expense and storage space.

i am looking in the used market but not 100% sure I want to buy used due to the lack of warranty and generally i'm not that comfortable assessing the condition of a small gas engine.

the machines i'm considering are as follow:

Murray 5hp, single stage, 21 inch with Tech engine CAD479 at HD

Ariens 5hp, single stage, 22 inch with Tech engine CAD661 at local dealer.

Toro, 3.25 hp, single stage, CAD569 at local dealer

Based on my research the Ariens is the superior machine however it comes at a 38% premium over the Murray.  Toro seems to be a good name but based on specs the Ariens seems to give you better value.

Bearing in mind my needs and that cost is a factor, is the Murray machine adquate? 

Would the Ariens and Murray both have the same engine or does Tech make different engines for different mfgs?

Are there other options out there that would fit in my budget. ie. $400-$700

Thanks

If big snows and drifting are a possibility, my opinion is that  these machines  may be too small.  If you can find another 100-200,  one of the smaller 2-stage machines  may be better suited. If not , inquire at the local dealers if they have any trade-ins to sell.

AZ

The engine is you last concern.

Ariens.

You didn't mention how long your driveway is and what the End of Driveway (EOD) is like. I have a neighbour who has a Honda single stage. She is happy with it but is happier still to see me coming down the street with a 2 stage unit. so a lot depends on how well you take getting bogged down occasionally. I have 11HP and still get bogged evey so often but then I'm claning 20-30 driveways and I tend run run the machine in 6th as much as possible, could be I'm just impatient.

Bottom line is that a single stage will probably work but you will probably spend more time whan you might want whenever it is deep and wet. If its icy they all have problems but a two stage has less.

well after a bit more research at the dealer i have narrowed down my choices.  the guy at the dealer recommends the single stage for the wet snow that we get here in Ontario and also because some of the hp in a double stage goes towards the drive and since i'm in my mid 30's i should have no problem manuvering the machine.  his choice would be the Toro based on performance and longevity.  I'm torn between the Ariens 7hp and Toro 5 hp and am even considering the Ariens 5hp just because of price point.  In the end I want the best machine for the money.

Ariens 722 - 7hp  with electric start CAD810

Toro 2450 - 5hp recoil start CAD800

Ariens 522 - 5hp with recoil start CAD660

still debating between the three but getting there, any feedback on these models would be appreciated.

seabird wrote:

Given those prices, the Ariens 722 is an easy choice over the Toro. I would prfer to err on the side of caution and get the bigger machine...but I don't want to spend your money. The smaller Ariens will work, but it will take longer to do the job in a heavy snow. If you can live with the trade-off, that's up to you.

AZ

thanks for the feedback.

this morning i was thinking the same thing, 7hp Ariens figuring more hp and electric start.  however i dropped by the dealer today and asked the salesperson a few more questions.  i asked which unit he would buy between the 5hp Toro and 7hp Ariens at basically the same price point and he said the 5hp Toro.  He said he has used both units  and the Toro outperformed the Ariens.  The superior performance and build quality were his key reasons.

now i'm confused more than ever going back and forth between the two and also throwing in the 5hp Ariens every now and then.

ive done more research on the units on the internet and the Toro does have a lot of positive feedback while info on the Ariens is limited.

would like to hear from anyone who has the 722 Ariens.

Hi, I have an old Viking mid 70s  21 inch 1 stage  with a tecm 7hp telling you boy this machine eats the snow, whatever  slushy

one flaky or thick is the condition but mine is all metal new ones are rubber auger less dangerous.

if  its 7 hp go for it but 5hp hummm.....

Denis

I'm partial to Ariens...but I did own a few toro single stage blowers years ago.  Both i'm sure are good units.
With the Ariens you get a 3 year warranty, and with the 722EC you also get the quick turn chute rotation.

I know it is easy for me to spend other peoples money, but i'd advise you to get want you want and need.
The only thing worse then spending too much is not spending enough and ending up with a underpowered unit that every year you say to yourself, "Jeez, I wish I went bigger."

Something you will own for years and years.....the bigger/better is only a few extra bucks per year.

Cry once when you buy it, be happy you did for years after.........

Frank D.

thanks for the words of wisdom frank.

i'm pretty set on price at the $800 mark, its really between the 5hp toro and 7hp ariens.

features are not as important to me as: 1st priority - Performance 2nd priority - Build Quality.

i think both are acceptable on the build quality, however i'm not convinced the ariens will outperform the toro just based on hp.

this is the $64k question.

I guess I'd ask.....
What feels better to you?  If they are at different dealers, what dealer has the better service?  Talk to the guy(s) that are in the back and really work on them daily....ask them.
I'd rather talk to the service guys then any "salesman".

Good luck! tell us that you decide......

Frank D.