Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > New Member w/Sno-Burst problem
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions |
|
kevandhel
Joined: Aug 23, 2005
Points: 0
|
|
New Member w/Sno-Burst problem
Original Message Aug 23, 2005 7:03 pm |
|
Good eve. all. I am a new member. I just purchased an old, don't know how old, Jacobsen Sno-Burst. I'm hoping that someone will know about this snow thrower. I'm not sure about the model except it says Electronic ignition and the label on the top-front says Jac-339498 and takes a 50-1mixture. It has a starting problem but gets spark at the plug. Any suggestions and information about the age and where to find a manual would be of great help. Thanks kevandhel
|
cilynx
Joined: Feb 26, 2007
Points: 7
|
|
Re: New Member w/Sno-Burst problem
Reply #3 Feb 26, 2007 12:01 pm |
|
|
solara
Location: Boston
Joined: Jun 16, 2004
Points: 252
|
|
Re: New Member w/Sno-Burst problem
Reply #5 Feb 26, 2007 1:42 pm |
|
Cylinx, Excellent Link. ******************* Butt, never knew that they made their own engines/ Thanx and thanx
2004-2005 Ariens 11528LE Jacobsen snow-burst
|
cilynx
Joined: Feb 26, 2007
Points: 7
|
|
Re: New Member w/Sno-Burst problem
Reply #6 Mar 3, 2007 10:08 pm |
|
Thanks for the kudos. I didn't know that they did their own engines either. One thing I did glean from the Tecumseh manual was the workings of the idle/load circuits. I've got 90% of an photo-tutorial on rip start repair done as well. I don't suppose anyone knows where I can get the pawls for the rip clutch, or even what they look like such that I could fabricate my own? Mine went *poing* one rip and were never seen / heard from again. I'm currently starting it by wrapping a piece of cord around the output shaft by hand. That's why the carb job giving me a one-rip start was so important =)
This message was modified Mar 3, 2007 by cilynx
|
cilynx
Joined: Feb 26, 2007
Points: 7
|
|
Re: New Member w/Sno-Burst problem
Reply #8 Oct 9, 2009 11:26 pm |
|
Thanks to a kind passer-by, I now have a PDF of the original manual including exploded parts diagrams available along with my carb walkthrough: Jacobsen Sno-Burst Owner's Manual
This message was modified Oct 9, 2009 by cilynx
|
cilynx
Joined: Feb 26, 2007
Points: 7
|
|
Re: New Member w/Sno-Burst problem
Reply #10 Oct 20, 2009 9:13 pm |
|
Friiy, do you have any references to back that up? The owner's manual (linked above) states very clearly that the engine is a "Jacobsen J-501 ST (2 cycle)". A quick Google search doesn't give me any reason to think that the J-501 was actually made by Tecumseh.
|
|
|