Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

There's an engine  for sale on eBay listed as

MODEL: LH358SA ENGINE FAMILY: 5TPXS.3582BF DISP: 358cc The shaft measures 2 1/4 inches in length with a diameter of 3/4 inches.

There is one key slot on this shaft which runs the entire length of the shaft.

Below the shaft the there are numbers stamped into the engine which read "19-0-155", "20"

There are four threaded holes that are 2 1/4 inches from each other and approximately 3 1/4 inches across from each other.

The engine is approximately 14 inches tall, and about 18 x 11 inches.

They don't list HP. Is this a 10hp or?

The LH358SA used too be called the HMSK110. (11 hp.)
L=  L-head.
H= Horizontal Crank.
358= displacement in cc.
S= Snow emission compliant.
A= Standard Specs.

Cool, I'm checking the specs to see if it bolts up the same way as the 8hp HMSK80 on my Ariens ST824.

Anyone know if the shaft diameter on an Ariens ST824 model # 924050 is 3/4"?

Just checked with calipers - 1" diameter shaft. Bummer, an 1124 would be a Good Thing....

Sorry with the late post, too late for Ebay. I think the guy did not list the specs correctly. I believe the Snow King engines are 3/4" shaft for 6HP and below, anything above that should be 1".