Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

I really like the size of the rear engine riders like the snappers.  I'm curious though why not many people seem to use them,  What are they good at? bad at? etc.  my home is on 1/3 acre and has about 5600 sqft of grass to cut,  no trees in the grass, and hill in the back ( I could post pics if I need to).   thank you in advance

I've actually read the owners manual (yes I read a manual) and it says that the battery should be removed if standing for more than 2 hours on it's end.  It's probably just a liability thing, I'm not sure.

Sherri

Mang

I think the Snapper RER would be a good fit for you since you say the 5600 sq ft is all grass and no trees. I have an old one, a 1985 and in my situation was not a good choice because of the turning radius on my machine is 28". I believe the newer ones are shorter.I woulld also get the 33: model rather than 28, the job will go faster. I have many nooks and crannies and trees and with such a large turning radus I am constantly putting it in reverse. I also must pull out the Personal Pace Toro to get areas done where it is impractical to get to with the Snapper.

They are in fact very durable and easy to maintain. The optional bagger is superb, these units pick up everything, including sand. I suggest if you do decide to get one, get a Ninja mulching blade for it it does a far better job of mulching then the Gator blades. If you intend to bag (doubtful) you must change the mulching blade to a high lift blade for maximum efficiency. My grass area is not as large as yours so after mulching I use my back pack blower to disperse any clumps that may have accumulated, only takes a few nimutes.

You can also check out the Ariens units, they too make a fine machine. If memory hasn't failed me (often does) I believe the newer ones have a turning radius of 16". That would be better for me but can't afford one right now.

Good information,   thanks for taking the time,

My concern is going to be the sharp turns around the edges of the grass,  we are going to put in a mow strip, this curbing is in a curvey line all the way around. I wish I could try one and see how it does before I commit.  Do the dealers typically let you demo a machine on your own yard before you buy?

From what I have experienced the dealer would really only like to do that for a regular customer.  I have an Ariens dealer close by that let sometimes lets his customers use the machine at their home.  If you don't like it he has to take a discount off of it, and that's a loss.  I would think a Deere dealer would have more leeway.  It all depends on the dealer. 

IF HE HAS ANY GRASS AROUND THE DEALERSHIP GIVE IT A SHOT. I SUGGEST RIDING AROUND ON IT ANYWAY BEFORE YOU BUY. YOU CAN GET A PRETTY GOOD IDEA FOR THE FEEL OF IT AND IT'S MANUVERABILITY ON A DRIVEWAY OR PARKING LOT.