Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Folks--I was reading on another forum and the topic of "compressioin reading for the engine to be healthy) was discussed.  They had an engine that would not start and made a statement it had a compression reading of 60 to 65 pounds.   All the other 2 items---spark and gas were present but it would not start.  That sounds too low to me.  What do you that are regularly working on engines have to say about this?--Will

I have an old Tecumseh H50 and was told the normal range was 60-90 psi. If  you're used to automotive readings that sounds low, but these are low compression  engines by contrast.  Mine is old and reads around 65. It's really only useful compared to another of the same type, or over time.

The HMSK80 I have has compression release so as mentioned above it's not meaningful.

Thanks to all of you for your posts.   I was not taking into consideration the compression release system.  Will talk to you all by posting later--your friend--Will

I'm told if you really want to get compression an engine with mechanical compression release, rotate it backwards. I've not tried this myself.

Garandman wrote:
G.
Only one problem with that.....How do you rotate an engine backwards?
Pull and electric starters only turn the engine one way.
I am sure that there are ways it can done.....but I also think setting that up would take more time than it's worth.