Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Deere Snowblower Part Needed
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions |
|
lland
Joined: Sep 17, 2002
Points: 605
|
|
Deere Snowblower Part Needed
Original Message May 31, 2005 9:32 pm |
|
O.K. Here’s the story… A friend of mine got a John Deere TRS32 snowblower from his father. It was first purchased on August 29, 1994 (SN: MOTR32X141386) and in great shape but my friend is in the process of replacing a few worn parts so it’s ready when winter comes. He’s pretty much done except for the spring at the end of the wheel drive cable. He replaced the auger drive spring (part no. M110629). He was given part no. M95681 for the auger but it’s not the right one. The M95681 has a “body” (for lack of a better term) that’s about 3 ¼ inches long and a “hook” coming off it that’s about 7” long. The one he needs has a 4 ¼” “body” and 1 ¾” “hook.” The auger spring he got (M110629) has a 3 1/4” “body” and 2 ¼” “hook.” His Deere dealer has been trying very hard but just can’t seem to find the right part. Apparently the parts manual is wrong. Any help would be appreciated. Thanks. LL
This message was modified May 31, 2005 by a moderator
2001 Toro 20023 Personal Pace 2002 John Deere Trimmer/Edger/Blower 2003 Craftsman DYT 4000 - 25HP/48" w/bagger 2003 Toro 826LE Snowblower 2004 Mantis Tiller/Dethatcher/Aerator/Edger 2005 Husqvarna 145BT Backpack Blower Rubbermaid 10CF Trailer Craftsman 40" Plug Aerator
|
robmints
Joined: May 13, 2003
Points: 4691
|
|
Re: Deere Snowblower Part Needed
Reply #1 May 31, 2005 9:47 pm |
|
|
|
|