Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Being kinda new here, I figured it would be kinda cool to share some pictures of your OPE collection  and describe what kind of yard you have. I will start it off:

I live in Wantagh Long Island NY. My house is on a corner and my property is 85 x 112 ft. (lots of sidewalk!) And around here, it is a contest to see who has the nicest yard Lots of people hire it done and I used to do the same for 2 years but the pro's can never do as good of a job as me  The Pressure Washer, Mower, Snowblower, and the Echo blower were all purchase since I joined this awesome  forum!  Look what you guys have done!!!!

Outdoor Power Equipment group shots. I just cleaned up all my equipment and changed the oil/filters and gave them all the once over. Back row From left to right...

Troy Built 4.75HP pressure washer, 4.5HP Craftsman Yard Vac, MTD 3.5HP edger, Bradley 32" 12.5 HP Mower, Ariens 8.5HP Snowblower...

Front row: Homelite line trimmer (cheap but it works) and Echo BP200 Blower

So far, I am very happy with this equipment (The Snow Blower has not been used yet) The only thing I would have purchased different is my line trimmer. I would have went with an Echo straight shaft.

OK...Now I showed you mine, lets see yours!!!

I was at Lowes a month or so ago and they had one of those big pressure washers with a 13HP Honda GX on clearance for $500, regularly around $1,000.  It was as-is but the only thing I could find wrong was that it was missing the hose assembly and any attachments it may have come with.  There was most likely nothing wrong with it as there had clearly never been any fuel in the tank.  I'm still kicking myself for not buying it.

I think it may have been this one.

LL

Hi LL.

 Just wondering how you like your Husqvarna 145 backpack blower. Thats the model I've been eyeing up, but haven't had a chance to test one yet. Does it have the power to move most debris and how is it to operate for an extended period of time. And if you don't mind me asking, how much did it cost you?

                                                                             Thanks,    Kevin

Kevin,

Here's the story behind the blower:  The story behind the blower

I'm still waiting for one part which should be here next Wednesday.  I haven't fired it up yet but I'll let you know when I do.

LL

Thanks LL. I remember reading reading about that now. Good deal. Well, when you get it going let us know how it performs.

                                                                                      Thanks again,    Kevin

Brian,

How's that Craftsman Yard Vac work? I see them at Sears everytime I'm there, they stick them where you have to walk right buy them, you can't miss them at the Sears here. I always wondered how they did.

Marshall, If you have lots of leaves that you have to pick up (Not mulch with a mower) the macine is a god send! It has a powerful suction and will pick up small as well as very large leaves yet It leaves small peables in place! My buddy has one too (I talked him into it!) and he is just as happy with his. He picks up pine needles. The only issue he has is with the bag. He has to run over lots of concreate and it wears a hole in the bottom of the bag. He has gone through 3 of them so far and they are expensive. I actually use mine more than he does and am still on the original bag. As for the blower section, it is awesome! There is nothing like CFM!!! Makes my little Echo a toy in comparision! However, there is no way to adjust the air output without moving the whole machine. Sears sells a more expensive model that is red if  remember right and it has a bigger engine and a large air output tube that allows you to control the blowers output. Plus it is self propelled (I have NO IDEA why you would want that? it is soooo easy to push) Here is a picture from e-bay:

As for the wood chipper, it too is good for the small branches that fall from trees. Nothing to big but It will take whatever you can fit down the tube. I wonder how long before I need to sharpen the blades??? I have filed the bag a few times with just wood chips!

All in all, a good machine. The engine runs strong but is is hard to pull (has a large heavy cutter wheel inside that you are pulling along with the engine itself and therefore when you cut the engine there is a long coast down).

I hope this helps a bit.

When I get a chance, I am going to write up a review on all my gear and post it in the review sections. I may cut and paste whats above for the yard vac! LOL!!!

Thanks Brian, sounds like they really work well. I don't need one, I just throw my hi-lift blade on my RER and suck up everything, and I mean everything. Dog crap doesn't stand a chance.

I can see where they would really be beneficial. I had a neighbor once that mowed his lawn with a Jacobsen Reel Mower, and afterwards would take his Jacobsen Lawn Vac, much like yours and vacuum his lawn. He had a great looking lawn too!

Thanks.