Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

I've got to change several sets of tires on the 6" and 8" rims on snowblowers. BMF screwdrivers seem a little rough on the bead.
But none of the auto shops I've been to carry any, especially those OPE size. Nor does the lawn mower / snowblower dealer.

I was thinking perhaps an ATV dealer would have them? Any suggestions for size or type?

TIA

Outfits like Northern Tool have a "Mini tire Changer" for about $40. Anyone try one? I have three sets of tires to mount/demount so it would pay just about for itself.

Do tire shops change OPE tires or do I have to take it to an OPE delaer?

I took my front OPE tires with the rim still on it to the local tire service they had new tires 2 days later. 

G.
I have one of those tire machines.
I cant really tell from the picture.....but I think the one I use is a a little bit more heavy duty. (I could be wrong.)
I does work ok for breaking down beads...especially on rims that have a shallow well.
It also helps on the smaller b*stard rims (3"-4") (The small ones can be the toughest.) Sometimes if you can clamp a vise grip on the rim...you can "pull" and "turn" the tire onto the rim.
As far as using the "mounting bar thing" , I seldom use it...it just doesnt work that great on most tires and rims. (I wind up using screwdrives and WD, even when its mounted in the tire machine.)
There is no "easy" way too do tires. Some times you get lucky...and they are a piece of cake. Most of the time....they are just wrestling matches.
The 6" and 8" sizes that you are dealing with...are usually the easiest.
Why not just try the screwdrivers first? If you bend the lip of the rim you can bend them back with some vise grips. (Just dont go nuts with the bending.)
Many tire stores will mount tires for ope. (Around here they do.)
We get lots and lots of tires half mounted on rims....give it a try and if you succeed...good for you...
If you dont.....oh well...you wont be the first. Good luck.

The rear tires on riding mowers sometimes get soo stuck on the axle that you have to cut them off.  Especially the MTD ones it seems. 

I just bought two 14" tire irons as they're handy to have anyway.

Do you buy stems at an auto parts store? I'll give tubeless a try since I have six months before the snow flies......

Ah, only 6 more months and snow will be here.  I'll enjoy summer first. 

I bought two 14" tire irons on eBay for $16. Got the tire off in about 30 seconds without tearing into the bead. They work well.

Check out WWW.Harborfreight.com

Small tire changer for under $40.00 with tire tool's

Idem # 34552