Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > pull start on ariens 1128

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions
Search For:
nightstalker


Location: longIsland NY
Joined: Dec 15, 2004
Points: 5
pull start on ariens 1128
Original Message   Dec 28, 2004 9:08 pm
Tryed to post this on "WTB" but not to many replies so I will try this site. Ok after running my ariens for the first time for about an hour I shut it down for about 5 to 10 minutes then went to go and start it again the pull start felt like it had a lot of force behind it but I pulled it anyway and the cord broke so I fixed the cord but it still has a lot of force behind it. Any ideas on how to fix the problem?
Replies: 9 - 10 of 10Next page of topicsPreviousAllView as Outline
Marshall


As Long As There Are Tests, There Will Be Prayer In Public Schools. ;- )

Joined: Sep 16, 2002
Points: 7730
Re: pull start on ariens 1128
Reply #9   Dec 29, 2004 9:55 am
Maybe it's as simple as the pull start mechanism is screwed up?
krislu


Location: Long Island, NY
Joined: Dec 27, 2004
Points: 148
Re: pull start on ariens 1128
Reply #10   Dec 29, 2004 7:57 pm
It could just be on the compression stroke. It's harder to pull when it is. - Kris

           
Replies: 9 - 10 of 10Next page of topicsPreviousAllView as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42