Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > pull start on ariens 1128

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:

nightstalker

Location: longIsland NY
Joined: Dec 15, 2004
Points: 5

pull start on ariens 1128
Original Message Dec 28, 2004 9:08 pm

Tryed to post this on "WTB" but not to many replies so I will try this site. Ok after running my ariens for the first time for about an hour I shut it down for about 5 to 10 minutes then went to go and start it again the pull start felt like it had a lot of force behind it but I pulled it anyway and the cord broke so I fixed the cord but it still has a lot of force behind it. Any ideas on how to fix the problem?

Replies: 1 - 10 of 10

View as Outline

Marshall

As Long As There Are Tests, There Will Be Prayer In Public Schools. ;- )

Joined: Sep 16, 2002
Points: 7730

Re: pull start on ariens 1128
Reply #1 Dec 28, 2004 10:17 pm

How's the oil?

Jonathan

I am a marvelous housekeeper. Every time I leave a man I keep his house. -Zsa Zsa

Location: Near Albany NY
Joined: Sep 12, 2004
Points: 320

Re: pull start on ariens 1128
Reply #2 Dec 28, 2004 11:29 pm

You have electric start? If so, does the electric start turn over the engine? If not, I think Marshall may be hinting at engine seizure. I'd also take off the belt cover and see if the belts are slack. If they aren't, check to see why.

2004 Ariens 11528LE, Troybilt Horse "Big Red" Tiller (original), Troybilt Tuffy Tiller (original), Sears LT1000 mower, Lawn Boy 7073 21" mower, Stihl FS55 RC trimmer, Poulan Countervibe 3400 chainsaw

skyking3

Joined: Nov 14, 2002
Points: 217

Re: pull start on ariens 1128
Reply #3 Dec 29, 2004 8:38 am

pull the spark plug out and see if it will turn over.....................

should spin easily ....

if not your problem might be internal...........

bill

Dave___in___CT

Deliberate often...
...decide once...

Location: West-Central Connecticut
Joined: Sep 17, 2002
Points: 3159

Re: pull start on ariens 1128
Reply #4 Dec 29, 2004 8:57 am

Hi...

Maybe the drivetrain or auger are still engaged... ?
Should be able to pull slowly and turn the engine over...

Dave...

Whether you think you can or you can't... you're right.
Henry Ford

BCS Tractor & snowblower

whyme

Let it Snow, Let it Snow, Let it Snow.....

Location: Westchester, NY
Joined: Jan 2, 2004
Points: 114

Re: pull start on ariens 1128
Reply #5 Dec 29, 2004 9:12 am

My 1128 also had a similar problem where the pull start was very difficult. I plugged in the electric start & started the endgine & the next time, the pull start was easy to pull again.

I think what happened was that I did not let the cord retract 100 percent before the next pull. Somehow, the second pull was very tight & did not let me pull out all the way, so I use the electric start because I did not want to break the cord. I don't know what I did, but the pull start kind of reset itself.

GeorgeC

Ariens 1128LE and various other grown-up toys....

krislu

Location: Long Island, NY
Joined: Dec 27, 2004
Points: 148

Re: pull start on ariens 1128
Reply #6 Dec 29, 2004 9:20 am

Yeah, thank god for Electric start! Every time my machine acts up when trying to pull start it I plug her in and push the button and thats that! - Kris

boblloyd

"Forty-two," said Deep Thought, with infinite majesty and calm.

Location: MA
Joined: Dec 2, 2002
Points: 424

Re: pull start on ariens 1128
Reply #7 Dec 29, 2004 9:39 am

I wonder if the compression release mechanism has failed inside the motor. This would make it very hard to pull-start but the motor would run normally. -Bob

nightstalker

Location: longIsland NY
Joined: Dec 15, 2004
Points: 5

Re: pull start on ariens 1128
Reply #8 Dec 29, 2004 9:50 am

Yes there is oil in the engine and she does start with the electric start.

Marshall

As Long As There Are Tests, There Will Be Prayer In Public Schools. ;- )

Joined: Sep 16, 2002
Points: 7730

Re: pull start on ariens 1128
Reply #9 Dec 29, 2004 9:55 am

Maybe it's as simple as the pull start mechanism is screwed up?

krislu

Location: Long Island, NY
Joined: Dec 27, 2004
Points: 148

Re: pull start on ariens 1128
Reply #10 Dec 29, 2004 7:57 pm

It could just be on the compression stroke. It's harder to pull when it is. - Kris

Replies: 1 - 10 of 10

View as Outline