Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions |
|
cminds
Joined: Mar 18, 2005
Points: 6
![]()
|
 |
head
Original Message Apr 11, 2005 10:57 pm |
|
I am looking for a head for a K361s kohler engine, preferrably one that is complete. Used or brand new would be fine. If there are salvage yards please let me know. This engine is on GT18 Ariens tractor w/loader and need to get it running again. Thanks
|
Marshall
As Long As There Are Tests, There Will Be Prayer In Public Schools. ;- )
Joined: Sep 16, 2002
Points: 7730
![]()
|
 |
Re: head
Reply #7 Apr 12, 2005 8:45 pm |
|
cminds, Here's why I suggested that, your last 3 posts. You stated the engine and carb are obsolete, I don't know if you have found a replacement carb yet? You said the valve guide is done in, I don't know if you have found a replacement for that either? I am assuming that Kohler was no help? Seemed like you're having trouble. If I find something I'll post it. carburator
#4 Mar 18, 2005 9:12 pm
| |
can anybody tell me where I can get a replacement carb for a K361 18hp Kohler engine? My understanding is this engine and carb are obsolete. This engine is on a GT18 Ariens garden tractor. I hate to replace the engine, it runs good (when the carb was good) and doesn't use any oil. I have a Johnson loader on it plus use it to till gardens with the tractor. Re: carburator
#3 Mar 19, 2005 6:35 am
| |
They do make a carb for the K361,but it is smaller so you're not going to get the power that it had. Thanks for your help,maybe I'll give Kohler a call and see if they will help me. head for kohler
#2 Apr 8, 2005 6:50 am
| |
Does anybody know if I can still get parts for a K-361 Kohler engine? The valve guide on the exhaust side came loose and damaged the head beyond repair. I was told that you couldn't get parts any more for this engine. thanks for your help.
This message was modified Apr 12, 2005 by Marshall
|
Marshall
As Long As There Are Tests, There Will Be Prayer In Public Schools. ;- )
Joined: Sep 16, 2002
Points: 7730
![]()
|
|
|
Re: head
Reply #9 Apr 13, 2005 6:38 pm |
|
cminds, PecanmanWill did some prowling around for you and found the following, you might want to follow up. "Precise Engine Repair" mail@perr.comunit: Kohler model: K-361 Comments: I need a cyl head for one. Please tell me if they are available and how much. Answer: I would need your engine numbers. I know the exhaust valve is not available and the head is a bare head. Bruce - PER Thank you Will, you're a good egg!  |
cminds
Joined: Mar 18, 2005
Points: 6
![]()
|
|
|
Re: head
Reply #12 Apr 21, 2005 12:17 am |
|
sorry i haven't replyed sooner, but i found a kohler dealer where i live and he has been in contact with the company and he is trying to get prices for me. They have either the bare head or a complete head. I appreciate the help,though.
|
|
|
