Here's some more questions to get the brain working...
1. The _________ of an engine is the linear distancethat a piston travels in the cylinder bore from top dead center(TDC) to bottom dead center(BDC).
2. A _________ is the filler material placed between the cylinder block and cylinder head to seal the combustion chamber.
3. An ________ engine is an engine that has valves and related components located in the cylinder head.
4. T or F Cast iron cylinder blocks are heavier and more expensive, but are more resistant to wear and less prone to heat distorion than cast aluminum alloy cylinder blocks.
5. A ________ is a cylindrical engine component that slides back and forth in the cylinder bore by forces produced during the combustion process.
6. T or F Piston rings are commonly made from cast iron.
7. T or F Approximately 70% of the energy released in an internal combustion engine is converted into work.
8. A ___________ is a cast aluminum alloy or cast iron engine component fastened to the end of the cylinder block farthest from the crankshaft.
9. A _______ engine is an engine that has valves and related components located in the cylinder block.
10. T or F Displacement is the volume that a piston displaces in an engine when it travels from TDC to BDC during the same stroke.
11. The ___________ is an engine component that converts the linear motion of the piston into rotary motion.
12. T or F A compression ring is the piston ring located in the ring groove farthest from the piston head.
13. A ___________ is a component used to reduce friction and to maintain clearance between stationary and rotating components of an engine.
14. The __________________ event is an engine operation event in which spent gasese are removed from the combustion chamber and released into the atmosphere.
Hope to hear from you soon,
Sherri
If you don't have free speech, what do you have?
